Title:	Effect of scanning speed when measuring surface roughness
Authors:	Kubátová, Dana Melichar, Martin
Citation:	KUBÁTOVÁ, D., MELICHAR, M. Effect of scanning speed when measuring surface roughness. In: Annals of DAAAM and Proceedings of the International DAAAM Symposium. Vídeň, Rakousko: DAAAM International Vienna, 2018. s. 1249-1255. ISBN 978-3-902734-20-4 , ISSN 1726-9679.
Issue Date:	2018
Publisher:	DAAAM International Vienna
Document type:	konferenční příspěvek conferenceObject
URI:	2-s2.0-85060085857 http://hdl.handle.net/11025/31139
ISBN:	978-3-902734-20-4
ISSN:	1726-9679
Keywords in different language:	feed rate;D-optimal design;software filter;surface roughness
Abstract in different language:	In the field of practical metrology it is extremely important not only accuracy but also the measurement of measuring productivity activities which entail considerable costs. Within this article, was tested the influence of the velocity for measuring of roughness. Test was made in in controlled laboratory conditions on the quality and accuracy of the measurements In this paper experiment described test that was performed on standard pieces with defined Ra and Rz values. The test was performed on the principle of repeated measurement at different speeds. The speed was 0.1-3 mm / s, which is the range of Hommel Etami T 8000. This machine is currently used for calibration at the Czech Metrology Institute and is one of the leading machines for measuring roughness in technical practice. The results obtained clearly declare the effect on the results of the measured values. All measured data underwent statistical processing and subsequently verification of its accuracy.
Rights:	Plný text je přístupný v rámci univerzity přihlášeným uživatelům. © DAAAM International Vienna
Appears in Collections:	Konferenční příspěvky / Conference Papers (RTI) OBD

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.