| Název: | CFD simulation of the multiphase heat transfer during the quenching process |
| Autoři: | Novosád, Jan Peukert, Pavel Pomp, Norbert Klouček, Pavel |
| Citace zdrojového dokumentu: | JIRKOVÁ, Hana ed.; JENÍČEK, Štepán ed. Proceedings PING 2019: modern trends in material engineering: 10.-13.09.2019, Pilsen. 1. vyd. Plzeň: University of West Bohemia, 2019, s. 92. ISBN 978-80-261-0879-5. |
| Datum vydání: | 2019 |
| Nakladatel: | University of West Bohemia |
| Typ dokumentu: | konferenční příspěvek conferenceObject |
| URI: | http://hdl.handle.net/11025/35262 |
| ISBN: | 978-80-261-0879-5 |
| Klíčová slova: | vícefáze;CFD;kalení;polymer |
| Klíčová slova v dalším jazyce: | multiphase;CFD;quenching;polymer |
| Abstrakt v dalším jazyce: | The paper presents the results of the CFD simulation of quenching process for the ring shape sample. The aim of the work is to develop and validate the methodology for multiphase CFD simulation including the boiling during the quenching process. CFD simulation is provided in ANSYS Fluent. The Lee model is used for modelling the phase change during the quenching process. The first step consider the simulation of cooling of the ring sample when the correct model parameters will be found. Validation of results is performed by comparison with experimental data. Experimental was realized inside the own designed quenching bath device filled with quenching polymer. The general description of the experimental setup is included in the paper. The CFD results are cooling curves, i.e. variation of solid temperature on time. The Lee model parameters especially the evaporation frequency was tuned. Thin polymer film on the solid surface was considered to bring the results closer to the experimental data. The comparison between experiment and CFD shows very good agreement for higher temperatures, which covers the boiling stage. On the other hand for lower temperatures worse match of results was found caused probably by the sensitivity on the inlet velocity profile settings. Some recommendations for future work were defined. |
| Práva: | © University of West Bohemia |
| Vyskytuje se v kolekcích: | Proceedings PING 2019: modern trends in material engineering Proceedings PING 2019: modern trends in material engineering |
Soubory připojené k záznamu:
| Soubor | Popis | Velikost | Formát | |
|---|---|---|---|---|
| Novosad.pdf | Plný text | 180,01 kB | Adobe PDF | Zobrazit/otevřít |
Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam:
http://hdl.handle.net/11025/35262Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.