Název:	Breakdown and streamer behavior in homogeneous synthetic trimethylolpropane triesters insulation oil
Autoři:	Wang, Kaizheng Wang, Feipeng Shen, Zijia Lou, Ziyi Han, Qiuhuang Li, Jian Trnka, Pavel Rozga, Pawel
Citace zdrojového dokumentu:	WANG, K., WANG, F., SHEN, Z., LOU, Z., HAN, Q., LI, J., TRNKA, P., ROZGA, P. Breakdown and streamer behavior in homogeneous synthetic trimethylolpropane triesters insulation oil. IEEE transactions on dielectrics and electrical insuation, 2020, roč. 27, č. 5, s. 1501-1507. ISSN 1070-9878.
Datum vydání:	2020
Nakladatel:	Institute of Electrical and Electronics Engineers
Typ dokumentu:	článek article
URI:	2-s2.0-85092524677 http://hdl.handle.net/11025/42472
ISSN:	1070-9878
Klíčová slova v dalším jazyce:	homogeneous synthesis;trimethylolpropane esters;insulation oil;breakdown;streamers
Abstrakt v dalším jazyce:	A new method, which involves the addition of alkaline Al2O3 (3 wt%) and activated clay (5 wt%) as adsorbents for homogeneous synthetic trimethylolpropane triesters (TME), is reported here to not only improve electrical properties but also to shed light on future volume production. The results show that the acid value and the dielectric loss of TME oil is successfully reduced and meets IEC 61099. The viscosity of TME approaches that of mineral oil (MO) for transformers. In addition, TME oil with antioxidants exhibits fairly good oxidation stability that is evidenced by a notably high oxidation onset temperature of 226℃, which is 39 K and 14 K higher than that of commercial natural ester oil (NEO) (187℃) and MO (212℃), respectively. Furthermore, compared with the AC breakdown voltage (Vb) of NEO (65.3 kV) and MO (70.4 kV), the TME oil has a higher Vb=73.2 kV. Besides, the positive lightning impulse (LI) Vb and streamer behavior of TME at small gaps are comparable to those of MO and NEO. However, the negative LI Vb of TME and NEO are significantly lower than that of MO owing to the combined field variation towards the plane electrode which will facilitate the propagation of the streamer. Therefore, additives without oxygen, fluorine and chlorine should be given priority when they are used to improve the properties of insulation oil.
Práva:	Plný text je přístupný v rámci univerzity přihlášeným uživatelům. © Institute of Electrical and Electronics Engineers
Vyskytuje se v kolekcích:	Články / Articles (KET) Články / Articles (RICE) OBD

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.