Název:	The viscosity thermal dependence of paste material for electronics
Autoři:	Beshajová Pelikánová, I. Močička, J.
Citace zdrojového dokumentu:	Electroscope. 2016, č. 3.
Datum vydání:	2016
Nakladatel:	Západočeská univerzita v Plzni, Fakulta elektrotechnická
Typ dokumentu:	článek article
URI:	http://hdl.handle.net/11025/22035
ISSN:	1802-4564
Klíčová slova:	elektronika;pasty;teplota;electronics;pastes;temperature
Abstrakt v dalším jazyce:	The work is focused on properties of paste materials for electronics. Soldering pastes and pastes for screen printing were tested. The dynamic viscosity dependencies of pastes were analyzed. Viscosity of paste strongly affected the result of technological process. Viscosity is changed with temperature. Mentioned pastes belong to non Newtonian fluids. That means that viscosity of pastes is changed with shear rate too. Viscosity dependence on temperature increasing from room temperature to 50°C approximately was measured for chosen samples. Differences between viscosity of paste at room temperature and viscosity at storage temperature in refrigerator were determined too. Dial viscometer HBT type was used for viscosity measurement. Viscometer was equipped by measuring system with geometrical configuration cone – plate and system with standard disc spindle.
Práva:	Copyright © 2015 Electroscope. All Rights Reserved.
Vyskytuje se v kolekcích:	Číslo 3 (2016) - IMAPS flash Conference 2016 Číslo 3 (2016) - IMAPS flash Conference 2016

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.