Název:	DESIGN AND OPTIMIZATION OF PRODUCTION TECHNOLOGY OF THIN-WALLED VANADIUM PARTS
Autoři:	Kroft, Luboš Sýkora, Jindřich
Citace zdrojového dokumentu:	KROFT, L. SÝKORA, J. DESIGN AND OPTIMIZATION OF PRODUCTION TECHNOLOGY OF THIN-WALLED VANADIUM PARTS. In Proceedings of the 32nd International DAAAM Virtual Symposium ''Intelligent Manufacturing & Automation. Vienna: DAAAM International,, 2021. s. 209-214. ISBN: 978-3-902734-33-4 , ISSN: 1726-9679
Datum vydání:	2021
Nakladatel:	DAAAM International Vienna
Typ dokumentu:	konferenční příspěvek ConferenceObject
URI:	2-s2.0-85123957230 http://hdl.handle.net/11025/47081
ISBN:	978-3-902734-33-4
ISSN:	1726-9679
Klíčová slova v dalším jazyce:	Machining;vanadium;thin-walled part;manufacturing technology;high precision
Abstrakt v dalším jazyce:	This article deals with one of the research directions solved at the Department of Machining Technology of the University of West Bohemia in the field of thin-walled parts machining technology. The main objective of this research was to find suitable conditions for machining parts made of nearly pure vanadium. Materials such as vanadium are used more and more frequently in the industry and their application, for example in medicine, is nowadays much more common. One of the most critical issues in machining vanadium parts is its relatively high toughness combined with low thermal conductivity, which makes its machining characteristics close to materials like titanium. The combination of these material properties together with a thin-walled part and the requirement for very high precision of the product adds up and creates a rather complex problem that needed to be solved so that the whole manufacturing process could be subsequently deployed in a real production environment.
Práva:	© DAAAM
Vyskytuje se v kolekcích:	Konferenční příspěvky / Conference papers (KTO) OBD

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.