Full metadata record
DC pole | Hodnota | Jazyk |
---|---|---|
dc.contributor.author | Hlaváč, Jan | |
dc.contributor.author | Dekastello, Jiří | |
dc.contributor.author | Čechura, Milan | |
dc.contributor.author | Volejníček, Martin | |
dc.contributor.author | Kubec, Václav | |
dc.date.accessioned | 2022-10-31T11:00:14Z | - |
dc.date.available | 2022-10-31T11:00:14Z | - |
dc.date.issued | 2022 | |
dc.identifier.citation | HLAVÁČ, J. DEKASTELLO, J. ČECHURA, M. VOLEJNÍČEK, M. KUBEC, V. Sawing energy in mechanical crank press drives. Advances in Mechanical Engineering, 2022, roč. 14, č. 2, s. nestránkováno. ISSN: 1687-8132 | cs |
dc.identifier.issn | 1687-8132 | |
dc.identifier.uri | 2-s2.0-85125862626 | |
dc.identifier.uri | http://hdl.handle.net/11025/49811 | |
dc.format | 12 s. | cs |
dc.format.mimetype | application/pdf | |
dc.language.iso | en | en |
dc.publisher | Sage | en |
dc.relation.ispartofseries | Advances in Mechanical Engineering | en |
dc.rights | © authors | en |
dc.title | Sawing energy in mechanical crank press drives | en |
dc.type | článek | cs |
dc.type | article | en |
dc.rights.access | openAccess | en |
dc.type.version | publishedVersion | en |
dc.description.abstract-translated | The paper deals with the drive options of mechanical presses and their influence on energy efficiency. Although the main focus is on energy efficiency, we also emphasize design and operational issues. The press machine is divided into two separate sections-the machine side and the drive side. The machine side and its efficiency is described using an energy balance formula. We quantify the energy balance for an 80 MN forging press. We describe eight different types of drives from a typical drive with a flywheel to direct drive and their combinations. We describe individual losses and efficiencies for components of the drive side. | en |
dc.subject.translated | Forming machines | en |
dc.subject.translated | drive | en |
dc.subject.translated | energy saving | en |
dc.subject.translated | crank press | en |
dc.identifier.doi | 10.1177/16878132221076807 | |
dc.type.status | Peer-reviewed | en |
dc.identifier.document-number | 766047500001 | |
dc.identifier.obd | 43935189 | |
dc.project.ID | EF16_026/0008404/Strojírenská výrobní technika a přesné strojírenství | cs |
Vyskytuje se v kolekcích: | Články / Articles (KKS) OBD |
Soubory připojené k záznamu:
Soubor | Velikost | Formát | |
---|---|---|---|
OBD_43935189.pdf | 2,4 MB | Adobe PDF | Zobrazit/otevřít |
Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam:
http://hdl.handle.net/11025/49811
Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.