Název: | Finding a Crack’s Position and its Parameters on the basis of Non-Destructive testing, using Eddy Currents |
Autoři: | Jesenik, Marco Hamler, Anton Trlep, Mladen |
Citace zdrojového dokumentu: | ISTET 2013: International Symposiumon Theoretical Electrical Engineering: 24th – 26th June 2013: Pilsen, Czech Republic, p. IV-29-IV-30. |
Datum vydání: | 2013 |
Nakladatel: | University of West Bohemia |
Typ dokumentu: | konferenční příspěvek conferenceObject |
URI: | http://hdl.handle.net/11025/11514 |
ISBN: | 978-80-261-0246-5 |
Klíčová slova: | modelování;vířivý proud;metoda konečných prvků;nedestruktivní testování |
Klíčová slova v dalším jazyce: | modelling;eddy current;finite element method;non-destructive testing |
Abstrakt: | The purpose of this paper was to find the geometry of a crack within a conductive plate and its parameters, on the basis of non-destructive testing, using eddy currents. The input data represents the measured values of magnetic flux density within the centre of the excitation coil. The position of a crack can be determined by taking into consideration any change in the magnetic flux density between the measured points. The depth and width are determined through the use of a finite-element model. These calculations are the basis for determining a function that explains how magnetic flux density changes if the depth or width has changed. After wards, through the Newton-Raphson iterative procedure using the finite-element method calculation results, the crack depth and width can be obtained. The suitability of the presented method was verified by the experimental example. |
Práva: | © University of West Bohemia |
Vyskytuje se v kolekcích: | ISTET 2013 ISTET 2013 ISTET 2013 |
Soubory připojené k záznamu:
Soubor | Popis | Velikost | Formát | |
---|---|---|---|---|
Jesenik.pdf | Plný text | 270,64 kB | Adobe PDF | Zobrazit/otevřít |
Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam:
http://hdl.handle.net/11025/11514
Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.