| Název: | Influence of temperature and speed of the laser head on the final structure surface hardened steel ČSN 12050 (EN 10083-2 steel 1.1191) |
| Autoři: | Peukert, Pavel Švec, Martin |
| Citace zdrojového dokumentu: | JIRKOVÁ, Hana ed.; JENÍČEK, Štepán ed. Proceedings PING 2019: modern trends in material engineering: 10.-13.09.2019, Pilsen. 1. vyd. Plzeň: University of West Bohemia, 2019, s. 54. ISBN 978-80-261-0879-5. |
| Datum vydání: | 2019 |
| Nakladatel: | University of West Bohemia |
| Typ dokumentu: | konferenční příspěvek conferenceObject |
| URI: | http://hdl.handle.net/11025/35236 |
| ISBN: | 978-80-261-0879-5 |
| Klíčová slova: | laser;tepelné zpracování;povrchové kalení;nekonvenční metody |
| Klíčová slova v dalším jazyce: | laser;heat treatment;surface hardening;unconventional methods |
| Abstrakt v dalším jazyce: | Laser technologies are listed as unconventional methods of machining and heat treatment, which allows many advantages. In the area of heat treatment the laser technology allows a wide range of surface hardening. It provides a very fast and effective approach where the region of influence of the material is quit narrow. It is also possible to hardening parts and materials which were not possible to process with the conventional processes. To get the required depth and quality of the hardened layer it is necessary to set up properly the laser process parameters (temperature in the process area, feed rate of the laser head, etc.), which varies for different materials. The paper presents a test for optimal process parameters for surface hardening of the material ČSN 12050 (EN 10083-2 steel 1.1191). The surface structure for temperatures of 900, 1100, 1200 and 1300°C and laser head feed rates of 0.003, 0.005 and 0.007 m/s were tested. Best results were obtained for a temperature of 1300°C and a feed rates of 0.003 m/s. |
| Práva: | © University of West Bohemia |
| Vyskytuje se v kolekcích: | Proceedings PING 2019: modern trends in material engineering Proceedings PING 2019: modern trends in material engineering |
Soubory připojené k záznamu:
| Soubor | Popis | Velikost | Formát | |
|---|---|---|---|---|
| Peukert.pdf | Plný text | 247,07 kB | Adobe PDF | Zobrazit/otevřít |
Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam:
http://hdl.handle.net/11025/35236Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.