Full metadata record
| DC pole | Hodnota | Jazyk |
|---|---|---|
| dc.contributor.author | Heczko, Jan | |
| dc.contributor.author | Krystek, Jan | |
| dc.contributor.author | Kottner, Radek | |
| dc.date.accessioned | 2021-09-13T10:00:12Z | - |
| dc.date.available | 2021-09-13T10:00:12Z | - |
| dc.date.issued | 2020 | |
| dc.identifier.citation | HECZKO, J., KRYSTEK, J., KOTTNER, R. Tensile Tests of 3D Printed PLA and Calibration of an Orthotropic Material Model. In: Experimental Stress Analysis 2020 Book of full Papers. Ostrava: VŠB – Technical University of Ostrava, 2020. s. 113-122. ISBN 978-80-248-4451-0. | cs |
| dc.identifier.isbn | 978-80-248-4451-0 | |
| dc.identifier.uri | 2-s2.0-85105956332 | |
| dc.identifier.uri | http://hdl.handle.net/11025/45147 | |
| dc.format | 10 s. | cs |
| dc.format.mimetype | application/pdf | |
| dc.language.iso | en | en |
| dc.publisher | VŠB – Technical University of Ostrava | en |
| dc.relation.ispartofseries | Experimental Stress Analysis 2020 Book of full Papers | en |
| dc.rights | Plný text není přístupný. | cs |
| dc.rights | © VŠB – Technical University of Ostrava | en |
| dc.title | Tensile Tests of 3D Printed PLA and Calibration of an Orthotropic Material Model | en |
| dc.type | konferenční příspěvek | cs |
| dc.type | conferenceObject | en |
| dc.rights.access | closedAccess | en |
| dc.type.version | publishedVersion | en |
| dc.description.abstract-translated | Tensile tests of a desktop 3D printed polylactic acid (PLA) material are presented. Four different angles of infill orientation were measured, all with the same infill density of 100 %. Poisson's ratios were determined in another set of tests using strain gauges and larger specimens. Calibration of a linear orthotropic material model was performed. | en |
| dc.subject.translated | 3D printing | en |
| dc.subject.translated | PLA | en |
| dc.subject.translated | Tensile test | en |
| dc.subject.translated | Anisotropic material | en |
| dc.subject.translated | Orthotropic material model | en |
| dc.type.status | Peer-reviewed | en |
| dc.identifier.obd | 43930718 | |
| dc.project.ID | LO1506/PUNTIS - Podpora udržitelnosti centra NTIS - Nové technologie pro informační společnost | cs |
| Vyskytuje se v kolekcích: | Konferenční příspěvky / Conference papers (NTIS) OBD | |
Soubory připojené k záznamu:
| Soubor | Velikost | Formát | |
|---|---|---|---|
| 2020_EAN_Heczko.pdf | 627,64 kB | Adobe PDF | Zobrazit/otevřít Vyžádat kopii |
Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam:
http://hdl.handle.net/11025/45147Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.