Title: Influence of position in 3D printing process on mechanical properties of metal prints
Authors: Krystek, Jan
Kaňáková, Sandra
Kroupa, Tomáš
Zemčík, Robert
Zikmund, Petr
Rous, Pavel
Steiner, František
Vaňková, Tereza
Citation: KRYSTEK, J., KAŇÁKOVÁ, S., KROUPA, T., ZEMČÍK, R., ZIKMUND, P., ROUS, P., STEINER, F., VAŇKOVÁ, T. Influence of position in 3D printing process on mechanical properties of metal prints. In: Experimental Stress Analysis 2020 Book of full Papers. Ostrava: VŠB – Technical University of Ostrava, 2020. s. 263-268. ISBN 978-80-248-4451-0.
Issue Date: 2020
Publisher: VŠB – Technical University of Ostrava
Document type: konferenční příspěvek
URI: 2-s2.0-85105940394
ISBN: 978-80-248-4451-0
Keywords in different language: Experiment;Metal 3D print;Tensile test;computed tomography
Abstract in different language: This paper researches the influence of the placement during the 3D printing process on the quality of the final product. The tensile tests were carried out on standard dog-bone specimens, which were printed both horizontally or vertically with three orientation angles 0°, 45°, 90° to the main direction of the plate. The main goal of the measurements was to determine the influence of the printing orientation and placement of the specimens on the mechanical properties. Obtained data were evaluated and used for the determination of the best printing orientation.
Rights: Plný text není přístupný.
© VŠB – Technical University of Ostrava
Appears in Collections:Konferenční příspěvky / Conference Papers (KET)
Konferenční příspěvky / Conference papers (NTIS)

Files in This Item:
File SizeFormat 
EAN_2020_Krystek.pdf1,57 MBAdobe PDFView/Open    Request a copy

Please use this identifier to cite or link to this item: http://hdl.handle.net/11025/45152

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

  1. DSpace at University of West Bohemia
  2. Publikační činnost / Publications
  3. OBD