Full metadata record
DC poleHodnotaJazyk
dc.contributor.authorBaranovskis, Reinis
dc.contributor.authorBerenis, Didzis
dc.contributor.authorGrants, Ilmars
dc.contributor.authorBojarevics, Andris
dc.contributor.authorBeinerts, Toms
dc.date.accessioned2021-11-08T11:46:14Z
dc.date.available2021-11-08T11:46:14Z
dc.date.issued2021
dc.identifier.citationProceeding of UIE 2021: XIX International UIE Congress on Evolution and New Trends in Electrothermal Processes. 1.-3.2021, Pilsen, Faculty of Electrical Engineering, University of West Bohemia, Czech Republic, 2021, p. 21-22.en
dc.identifier.isbn978-80-261-0930-3
dc.identifier.urihttp://hdl.handle.net/11025/45754
dc.format2 s.cs
dc.format.mimetypeapplication/pdf
dc.language.isoenen
dc.publisherFaculty of Electrical Engineering, University of West Bohemiaen
dc.rights© IEEEen
dc.subjectodplyňování hliníkucs
dc.subjectMHD modelovánícs
dc.subjectexperiment GaInSncs
dc.subjectčerpadlo s permanentním magnetemcs
dc.subjectbublinkové prouděnícs
dc.titleNew contactless aluminum degassing system - GaInSn model experiments with a numerical studyen
dc.typeconferenceObjecten
dc.typekonferenční příspěvekcs
dc.rights.accessopenAccessen
dc.type.versionpublishedVersionen
dc.description.abstract-translatedMolten aluminum in metallurgy environment col lects hydrogen from ambient air and water vapor thus after crys tallization causing porosity. Therefore hydrogen concentration must be reduced below a certain threshold before the final metal product is made. The most common way is gas purging when inert gas is injected in the melt which absorbs dissolved hydrogen and leaves the metal through the free surface. The existing meth ods need a mechanical contact with hot and chemically aggressive aluminum which leads to higher maintenance costs. We propose a novel contactless degassing method which uses electromagnetic forces to drive the flow and split the injected inert gas bubbles. Numerical analysis is used to study permanent magnet driven flows and to optimize the degassing process. The problem is solved by coupling OpenFoam for hydrodynamic calculations and Elmer for electromagnetic calculations. According to them, the most promising design is chosen for GaInSn experimental scale model (see Fig. 1). In experiments the velocity field and the developed pressure in different operating regimes has been obtained and later compered to the numerical model. Results show that the iron yokes can be used as a cost effective tool for magnetic flux concentrators even on rotating permanent magnet machinery providing at least a 30 % pressure increase. Overall, the system can achieve large velocities which when scaled to industrial sized setup would be sufficient for the argon dissipation to take place. The developed pressure head is high enough to lift aluminum several meters, allowing device to be integrated in a manufacturing lineen
dc.subject.translatedaluminum degassingen
dc.subject.translatedMHD modellingen
dc.subject.translatedGaInSn experimenten
dc.subject.translatedpermanent magnet pumpen
dc.subject.translatedbubble flowen
dc.type.statusPeer-revieweden
Vyskytuje se v kolekcích:UIE 2021
UIE 2021

Soubory připojené k záznamu:
Soubor Popis VelikostFormát 
Proceeding_2021_final-20-21.pdfPlný text1,09 MBAdobe PDFZobrazit/otevřít
uvod_tiraz_obsah.pdfPlný text2,04 MBAdobe PDFZobrazit/otevřít
Zobrazit minimální záznam Zobrazit statistiky


Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam: http://hdl.handle.net/11025/45754

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.

hledání
navigace
  1. DSpace at University of West Bohemia
  2. Publikace ZČU / UWB Publications
  3. Sborníky ZČU / UWB Proceedings
  4. Proceeding of UIE 2021: XIX International UIE Congress on Evolution and New Trends in Electrothermal Processes
  5. UIE 2021