Název: Four-leg transformer with defined zero sequence impedance for ground fault compensation
Autoři: Rezaei, Mohsen
Talla, Jakub
Komrska, Tomáš
Peroutka, Zdeněk
Citace zdrojového dokumentu: REZAEI, M. TALLA, J. KOMRSKA, T. PEROUTKA, Z. Four-leg transformer with defined zero sequence impedance for ground fault compensation. In International Conference on Applied Electronics (AE 2021) : /proceedings/. Pilsen: University of West Bohemia, 2021. s. 157-163. ISBN: 978-80-261-0972-3 , ISSN: 1803-7232
Datum vydání: 2021
Nakladatel: University of West Bohemia
Typ dokumentu: konferenční příspěvek
ConferenceObject
URI: 2-s2.0-85116419417
http://hdl.handle.net/11025/46753
ISBN: 978-80-261-0972-3
ISSN: 1803-7232
Klíčová slova v dalším jazyce: single earth fault;distribution grid;petersen coil;zero sequence current;transformer
Abstrakt v dalším jazyce: Single-phase ground faults are the most common faults in medium-voltage distribution grids. High-impedance grid grounding using a special four-leg transformer is discussed in the paper. The transformer’s zero-sequence impedance differs from positive-sequence impedance and it is designed to compensate the earth faults currents in Medium Voltage (MV) distribution grids when single-phase ground fault occurs. The designed transformer can replace the traditional arc suppression coils (ASC) in the case where no distribution transformer neutral is available or distributed compensation is required. Alternatively, the transformer can operate in parallel with the ASC.
Práva: © University of West Bohemia
Vyskytuje se v kolekcích:Konferenční příspěvky / Conference papers (RICE)
Konferenční příspěvky / Conference Papers (KEV)
OBD

Soubory připojené k záznamu:
Soubor VelikostFormát 
Rezai_Four-Leg.pdf1,11 MBAdobe PDFZobrazit/otevřít


Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam: http://hdl.handle.net/11025/46753

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.

hledání
navigace
  1. DSpace at University of West Bohemia
  2. Publikační činnost / Publications
  3. OBD