Název: | Switchable Broadband-to-Tunable Narrowband Magnetic Probe for Near-Field Measurements |
Autoři: | Almtrod, Abdalghfor Abdalghfar A Kubík, Zdeněk |
Citace zdrojového dokumentu: | ALMTROD, AAA. KUBÍK, Z. Switchable Broadband-to-Tunable Narrowband Magnetic Probe for Near-Field Measurements. SENSORS, 2022, roč. 22, č. 19, s. 1-19. ISSN: 1424-8220 |
Datum vydání: | 2022 |
Nakladatel: | MDPI |
Typ dokumentu: | článek article |
URI: | 2-s2.0-85139919695 http://hdl.handle.net/11025/51046 |
ISSN: | 1424-8220 |
Klíčová slova v dalším jazyce: | broadband;EMC;LC equivalent circuit;LGR magnetic probe;narrowband;PIN diode;varactor diode |
Abstrakt v dalším jazyce: | This paper presents a printed magnetic probe that can switch from broadband to tunable narrowband for near-field measurement. In the early design stage, we created a printed loop gap resonator as a magnetic reference sensor for the pre-compliance test in a band up to 6 GHz. Consequently, the results showed a good response in terms of the S11 and S21 parameters of the proposed probe compared with the commercial magnetic sensor XF-R 3-1. The source noise might spread among different frequency bands, making the broadband magnetic probe the closest choice for estimating the magnetic field in the near-field region. Unfortunately, broadband magnetic probes have lower sensitivity than narrowband ones. One of the solutions to get high sensitivity is to connect the LNA to the output of the passive magnetic sensor. This work proposes a novel method to solve this issue using a PIN diode to change the broadband status into a high sensitivity narrowband status and then tune this narrowband across the most critical applications such as 3.5 GHz, 3.75 GHz, 4.8 GHz, and 5.2 GHz with the help of a varactor diode. Compared to the broadband status, an improvement of more than 10 dB has been obtained across all these wireless bands. Furthermore, the proposed structure’s isolation between the electrical and magnetic fields is about 13 dB. |
Práva: | © authors |
Vyskytuje se v kolekcích: | Články / Articles (KEI) OBD |
Soubory připojené k záznamu:
Soubor | Velikost | Formát | |
---|---|---|---|
Kubik_sensors-22-07601-v3_.pdf | 6,08 MB | Adobe PDF | Zobrazit/otevřít |
Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam:
http://hdl.handle.net/11025/51046
Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.