Název:	Designed and fabrication of ENR polymer rib optical waveguides
Autoři:	Prajzer, Václav Lyutakov, Oleksiy Veselý, Tomáš Hüttel, Ivan Machač, Petr Jeřábek, Vítězslav
Citace zdrojového dokumentu:	Electroscope. 2009, Konference EDS 2009.
Datum vydání:	2009
Nakladatel:	Západočeská univerzita v Plzni, Fakulta elektrotechnická
Typ dokumentu:	článek konferenční příspěvek article conferenceObject
URI:	http://147.228.94.30/images/PDF/Rocnik2009/EDS_2009/prajzler.pdf http://hdl.handle.net/11025/535
ISSN:	1802-4564
Klíčová slova:	polymerní žebrové optické vlnovody;epoxidová pryskyřice;elektrotechnická výroba
Klíčová slova v dalším jazyce:	polymer rib optical waveguides;epoxy resin;electrical manufacturing
Abstrakt v dalším jazyce:	We report about design, fabrication and properties of the Epoxy Novolak Resin (ENR) polymer rib optical waveguides. Polymer waveguides were fabricated on silicon substrate with silica buffer layer and Epoxy novolak resin was used as the waveguide core material. Polymethylmethacrylate was used as a cover protection layer. The optical waveguides were designed by using software RSOFT using Beam propagation method and the minimum (critical) waveguiding thicknesses of the deposited layers were calculated using dispersion equation. Polymer layers were fabricated by spin coating and optical waveguides were form by using standard photolithography process. Propagation optical loss measurements were carried at 650 nm and 1310 nm using the cut-back method and the best samples had optical losses lower than 1.0 dB/cm at 650 nm and 0.6 dB/cm at 1310 nm.
Práva:	Copyright © 2007-2010 Electroscope. All Rights Reserved.
Vyskytuje se v kolekcích:	Konference EDS 2009 EDS 2009 (2009)

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.