Full metadata record
DC pole | Hodnota | Jazyk |
---|---|---|
dc.contributor.advisor | Džugan, Tomáš | |
dc.contributor.author | Čapek, Lukáš | |
dc.contributor.referee | Kroupa, Michael | |
dc.date.accepted | 2015-05-28 | |
dc.date.accessioned | 2016-03-15T08:51:08Z | - |
dc.date.available | 2014-10-15 | cs |
dc.date.available | 2016-03-15T08:51:08Z | - |
dc.date.issued | 2015 | |
dc.date.submitted | 2015-05-06 | |
dc.identifier | 62694 | |
dc.identifier.uri | http://hdl.handle.net/11025/18937 | |
dc.description.abstract | Tématem práce je elektrolytické leptání materiálografických výbrusů. V první části je popsán celý postup přípravy výbrusu se zaměřením především na elektrolytické leptání. Druhá část se věnuje návrhu mikropočítačem řízeného přístroje pro elektrolytické leptání. S tímto zařízením je možné provádět leptání při napětí do 20 V nebo při proudu do 4,5 A. Přístroj umožňuje míchání, chlazení a měření teploty elektrolytu. V závěru je uveden výsledek selektivního leptání dvou druhů pájek připájených na desku pro plošné spoje. Tímto pokusem byla ověřena funkčnost zařízení, zároveň ukázal některé možnosti využití elektrolytického leptání v materiálografii. | cs |
dc.format | 73 s. (88 972 znaků) | cs |
dc.format.mimetype | application/pdf | |
dc.language.iso | cs | cs |
dc.publisher | Západočeská univerzita v Plzni | cs |
dc.relation.isreferencedby | https://portal.zcu.cz/StagPortletsJSR168/CleanUrl?urlid=prohlizeni-prace-detail&praceIdno=62694 | - |
dc.rights | Plný text práce je přístupný bez omezení. | cs |
dc.subject | materiálografie | cs |
dc.subject | metalografie | cs |
dc.subject | elektrolytické leptání | cs |
dc.subject | elektrolytické leštění | cs |
dc.subject | elektrochemické leptání | cs |
dc.subject | elektrochemické leštění | cs |
dc.subject | selektivní leptání | cs |
dc.subject | leptací zařízení | cs |
dc.subject | výbrusy | cs |
dc.subject | mikrostruktura | cs |
dc.subject | pájené spoje | cs |
dc.subject | pájky | cs |
dc.subject | sn60pb40 | cs |
dc.subject | sn96.5ag3cu0.5 | cs |
dc.title | Elektrochemické leptání v materiálografii | cs |
dc.title.alternative | Electrochemical etching in materialography | en |
dc.type | diplomová práce | cs |
dc.thesis.degree-name | Ing. | cs |
dc.thesis.degree-level | Navazující | cs |
dc.thesis.degree-grantor | Západočeská univerzita v Plzni. Fakulta elektrotechnická | cs |
dc.thesis.degree-program | Elektrotechnika a informatika | cs |
dc.description.result | Obhájeno | cs |
dc.rights.access | openAccess | en |
dc.description.abstract-translated | The subject of this thesis is the electrolytic etching of materialographic specimens. The procedure of specimen preparation, especially its electrolytic etching, is described in the first part of the thesis. The second part is about the design of a microcomputer controlled device for electrolytic etching. This device can be used as a voltage supply with output from 0 V to 20 V and 0.5 V step or a current supply with output from 0 A to 4.5 A and 0.1 A step. It contains parts for a mixing of an electrolyte, its cooling and temperature measuring during the etching. In the last part of the thesis, there are presented the results of the selective electrolytic etching of two types of solders soldered on a printed circuit board. This experiment proved the function of the designed device and demonstrated some possibilities of electrolytic etching in the materialography. | en |
dc.subject.translated | materialography | en |
dc.subject.translated | metallography | en |
dc.subject.translated | electrolytic etching | en |
dc.subject.translated | electrolytic polishing | en |
dc.subject.translated | electrochemical etching | en |
dc.subject.translated | electrochemical polishing | en |
dc.subject.translated | selective etching | en |
dc.subject.translated | etching devices | en |
dc.subject.translated | microstructure | en |
dc.subject.translated | solders | en |
dc.subject.translated | solder joints | en |
dc.subject.translated | sn60pb40 | en |
dc.subject.translated | sn96.5ag3cu0.5 | en |
Vyskytuje se v kolekcích: | Diplomové práce / Theses (KAE) |
Soubory připojené k záznamu:
Soubor | Popis | Velikost | Formát | |
---|---|---|---|---|
ElektrochemickeLeptaniVMaterialografii.pdf | Plný text práce | 5,04 MB | Adobe PDF | Zobrazit/otevřít |
vedouci-062694_vedouci.pdf | Posudek vedoucího práce | 312,64 kB | Adobe PDF | Zobrazit/otevřít |
oponent-062694_oponent.pdf | Posudek oponenta práce | 356,83 kB | Adobe PDF | Zobrazit/otevřít |
obhajoba-062694_hodnoceni.pdf | Průběh obhajoby práce | 284,11 kB | Adobe PDF | Zobrazit/otevřít |
Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam:
http://hdl.handle.net/11025/18937
Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.