Title: FEM simulation of elasto-plastic tube indentation
Authors: Marvalová, B.
Hruš, T.
Hrouda, A.
Citation: Computational mechanics 2018: book of extended abstracts: 34th conference with international participation, p. 63-64.
Issue Date: 2018
Publisher: Západočeská univerzita v Plzni
Document type: konferenční příspěvek
URI: http://hdl.handle.net/11025/30809
ISBN: 978-80-261-0819-1
Keywords: simulace pomocí metody konečných prvků;elastické plastové trubky
Keywords in different language: finite element method simulation;elasto-plastic tube
Abstract in different language: Paper provides the summary of the FEM simulation of elasto-plastic strains and stresses in the course of the local indentation of a steel pipe by a spherical indenter. The FEM calculation was performed according to the recommendation of API 579-1 / ASME FFS-1 2007 for Level 3 dent assessment. Series of 65 FE calculations of the elasto-plastic state of the indented tubes was performed. The combination of three tube diameters D = 508, 920 and 1420 mm with the ratios between the diameter and the wall thickness D/h = 91, 76, 64, 51 and 37 resp. were used. The diameters of the spherical rigid indenters were 100 and 200 mm, the depth of the indent varied gradually from 75 to 150 mm. The residual stresses and strains in the vicinity of the dent after the relieving of load were determined together with the depth and length of the resulting dent.
Rights: Copyright © 2018 University of West Bohemia, Plzeň, Czech Republic
Appears in Collections:Computational mechanics 2018
Computational mechanics 2018

Files in This Item:
File Description SizeFormat 
Marvalova.pdfPlný text468,79 kBAdobe PDFView/Open

Please use this identifier to cite or link to this item: http://hdl.handle.net/11025/30809

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.