Title: Deep hole drilling of thermoplastics
Authors: Upmeier, T.
Biermann, D.
Citation: Strojírenská technologie Plzeň 2011: sborník abstraktů: IV. ročník mezinárodní konference konané ve dnech 25.- 26.1.2011 v Plzni. Vyd. 1. Plzeň: ZČU v Plzni, 2011, s. [1-8]. ISBN 978-80-7043-934-0.
Issue Date: 2011
Publisher: Západočeská univerzita v Plzni. Fakulta strojní. Katedra technologie obrábění
Document type: konferenční příspěvek
URI: http://hdl.handle.net/11025/16399
ISBN: 978-80-7043-934-0
Keywords: vrtání hlubokých děr;termoplastické pryskyřice;kvalita díry
Keywords in different language: deep hole drilling;thermoplastic resin;hole quality
Abstract in different language: The properties of polymers can be adapted to nearly every functional need, so they are getting more and more attention as construction material. Individual and complex shaped parts demand machining operations to achieve the required workpiece quality. A challenge in machining polymers is their very low melting point, especially when drilling holes with a large length-to-diameter ratio. In the presented investigations, the comprehensive knowledge acquired from the single-lip deep-hole drilling process of metals is transferred to the machining of polymers. The results confirm the expected advantage of the single-lip deep-hole drilling tools concerning the hole quality with respect to the workpiece material.
Rights: © University of West Bohemia
Appears in Collections:Strojírenská technologie - Plzeň 2011 sborník příspěvků
Strojírenská technologie - Plzeň 2011 sborník příspěvků

Files in This Item:
File Description SizeFormat 
Upmeier.pdfPlný text414,24 kBAdobe PDFView/Open

Please use this identifier to cite or link to this item: http://hdl.handle.net/11025/16399

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.