This dissertation focuses on the simulation of the piping system preceding the SCR catalyst. The work explores five fundamental geometric modifications of systems designed to enhance the distribution of flue gas entering the catalyst through straightforward geometric adjustments. A key element&#x...

The non-standard behaviour of a centrifugal compressor equipped with inlet radial guide vanes during measurements on a development test bench is discussed. The problem is identified and described by means of a detailed evaluation of measurement data, dimensional analysis, mean flow calculati...

The thesis deals with the problem of the flow deviation behind the rotor row of an axial turbine stage. The aim of the work is to quantitatively describe the variation of the exit flow angle from the stage in the axial gap and to determine the magnitude of ...

The wake behind a wall-mounted finite-length circular cylinder of the aspect ratio 2 stuck out of a wall was studied experimentally using stereo PIV technique. The cylinder was mounted normal to a ground plane and it was subjected to a cross-flow with thin boundary layer ...

The airfoil NACA 64-618 is realized by using two levels of quality: first the theoretical profile is printed on a 3D printer in a direct, “naive” way, this geometry has been scanned by using 3D scanner and based on the deviations, a better model has been processed.&#...