Název: Návrh, analýza a aplikace řízení aktuátoru hmatové zpětné vazby a systému snímání tlaku pro dotykové vstupní zařízení v automobilu
Další názvy: Design, analysis and application of haptic feedback actuator control and force sensing circuitry for an automotive touch input device
Autoři: Svoboda, Miroslav
Vedoucí práce/školitel: Mráz Jan, Ing. Ph.D.
Oponent: Kubík Michal, Ing. Ph.D.
Datum vydání: 2018
Nakladatel: Západočeská univerzita v Plzni
Typ dokumentu: diplomová práce
URI: http://hdl.handle.net/11025/33268
Klíčová slova: voice coil actuator;h-bridge;finite element simulation;haptic feedback;tactile;perception;measuring circuitry;static part;moving part;equivalent circuit;force feedback
Klíčová slova v dalším jazyce: voice coil actuator;h-bridge;finite element simulation;haptic feedback;tactile;perception;measuring circuitry;static part;moving part;equivalent circuit;force feedback
Abstrakt: V této diplomové práci psané v angličtině byla spočítána, nasimulována a následně navržena elektrická část aktuátoru pro hmatovou zpětnou vazbu. Dále byly odsimulovány řídící a měřící obvody a následně byla navrhnuta deska plošných spojů. Na tento hardware byl vyhotoven software. Aktuátor je typu voice coil. Při stisku tlačítka se v cívce indukuje napětí, které je změřeno a následně zesíleno. Na základě této hodnoty, která se dostane na A/D převodník procesoru, je řízen H-můstek a je spínán tak rychle, že aktuátor vydává vibraci. Tato vibrace je následně předána uživateli přes dotykovou plochu. V poslední kapitole byla věnována pozornost především softwaru a následné interakci s hardwarem a mechanickou částí aktuátoru. Byla navržena vylepšení pro vývoj další verze haptického demonstrátoru.
Abstrakt v dalším jazyce: In this diploma work written in English, the electric part of an actuator for haptic feedback has been calculated, simulated and subsequently designed. Furthermore, control and measurement circuits were simulated and a printed circuit board was then designed. This software has been developed for this hardware. The actuator is a type of voice coil, where the voltage is induced with a press of a button. This voltage is measured and then amplified. Based on this value, which is received by the processor's A/D converter, the H-bridge is controlled and switches so quickly that the actuator emits a vibration, which is then transmitted to the user via the touchpad. In the last chapter, attention was paid mainly to the software, but also to the subsequent interaction with the hardware and the mechanical part of the actuator and their debugging. Improvements have also been proposed to the development of new version of the haptic demonstrator.
Práva: Plný text práce je přístupný bez omezení.
Vyskytuje se v kolekcích:Diplomové práce / Theses (KAE)

Soubory připojené k záznamu:
Soubor Popis VelikostFormát 
Master thesis_final_version.pdfPlný text práce6,29 MBAdobe PDFZobrazit/otevřít
074949_vedouci.pdfPosudek vedoucího práce367,83 kBAdobe PDFZobrazit/otevřít
074949_oponent.pdfPosudek oponenta práce459,01 kBAdobe PDFZobrazit/otevřít
074949_hodnoceni.pdfPrůběh obhajoby práce167,09 kBAdobe PDFZobrazit/otevřít


Použijte tento identifikátor k citaci nebo jako odkaz na tento záznam: http://hdl.handle.net/11025/33268

Všechny záznamy v DSpace jsou chráněny autorskými právy, všechna práva vyhrazena.