Bakalářské práce / Bachelor´s works (KTO) Collection home page

Browse
Subscribe to this collection to receive daily e-mail notification of new additions RSS Feed RSS Feed RSS Feed
Collection's Items (Sorted by Submit Date in Descending order): 1 to 20 of 175
Vágnerová, Anna
Návrh systému hodnocení pracovních rizik ve firemní praxi

The bachelor thesis was prepared for the specific topic in the selected company. The aim of the work is to create the risk assessment in the selected company and to propose corrective measures. The result of the work is the creation of documentation for risk assessment&#x...

Šedivá, Diana
Ergonomická studie uspořádání laboratoře KTO

This bachelor thesis focuses on the evaluation of the workplace in terms of ergonomics. The workplace is considered as a working space for machine operators and lectures. The machine operator's work space is assessed using 2 selected ergonomic methods. Appropriate remedial measures ...

Rehák, Petr
Technologické možnosti obráběcího centra EMCO Maxxturn 25

The main part of this work is the describing the designs of the components for machine EMCO Maxxturn 25 which is newly located in laboratory at the Department. All components are designed so they can be used for teaching on this machine. In the theoretical part there...

Nezbeda, Lukáš
Využití aditivních technologií v praktických aplikacích

The aim of this Bachelor thesis is to describe the use of Additive Manufacturing Technologies in practical applications. In the practical part there will be models printed with the FDM technology and employed in practice described and their benefits will be analysed. A tensile ...

Bublík, Ondřej
Konstrukce upínacího přípravku pro skupinu konstrukčních dílců v SW Catia V5

This thesis contains several methods of designing special fixtures. Thesis is focused on construction special fixture for our part. The model of the fixture is made in software Catia V5.

Bendl, Václav
Systém vyhodnocení chyb v kontrolních listech

This bachelor thesis is focused on the quality control of the process in the pre-production phase of refrigeration and deep-freezing cabinets at company Hauser s.r.o. The aim is to design a functional system of continuous improvement and to eliminate the errors arising in stage...

Sýkora, Jindřich
Aditivní technologie v oblasti modelů letadel

Building airplane models is an ideal domain for learning basics of engineering as well as for finding new engineering solutions which can be later used in industrial applications. Modern additive technologies have the potential to simplify and accelerate making of these models. Th...

Šindelář, Ondřej
Dokončovací soustružení titanových slitin

Aim of this bachelor thesis is analyzing current situation in the machining of titanium alloys. In the theoretical part were described characteristics of titanium alloys and features affecting machinability. Attention was paid to description of technology of several chosen tooling companies. ...

Bulín, Petr
Studie způsobilosti procesu výroby na CNC obráběcích strojích ve společnosti ASTRO KOVO PLZEŇ s.r.o.

Bacheleor thesis is about process capability of the production in the company ASTRO KOVO PLZEŇ s.r.o. The result of this bachelor thesis are capability indexes Cm, Cmk, Cp, Cpk

Dudáčková, Simona
Optimalizace ruční montáže s ohledem na ergonomii

The thesis focuses on the evaluation of work activities in terms of ergonomics. There are two work activities at the workplace in question. The selected activities are evaluated using 3 selected ergonomic methods. Appropriate corrective actions were proposed following the evaluation of ...

Kratochvíl, Václav
Porovnání technologických možností CAD/CAM systémů FreeCAD a SolidCAM

The goal of the thesis is a comparison of the technological capabilities of CAD/CAM systems FreeCAD and SolidCAM. In the first section the thesis focuses on concepts and definition of CAD/CAM systems. In the second part the thesis describes particular systems, their user ...

Šambergerová, Štěpánka
Ergonomická analýza vybraného pracoviště

This bachelor thesis contains an ergonomic analysis of the selected workplace. Using the application of several methods, riskiness of selected activity is determined and corrective actions are taken.

Bureš, Martin
Využití laserového mikroobrábění pro úpravu povrchu 3D tištěných kovových dílů

The main aim of bachelor thesis is the surface treatment of 3D printed metal parts by low-cost nanosecond fiber laser. The chapters of this thesis discuss about parameters of laser, setting of the laser for laser micromachining and influence of each parametrs on final surface&...

Franc, Štěpán
Evaluace měřicích metod ve společnosti Wikov Gear s.r.o.

This work deals with evaluation of measuring instruments and methods in the Wikov Gear s.r.o. company. Work purpose is compare the accuracy of two measuring machines, which are used by this company, evaluate suitability of their utilization and recommend utilization of...

Michal, Jan
Návrh technologie výroby přípravku pro montáž rozvodové sady

This bachelor thesis is focused on the production of tool set for a car service. This tool set is for replacement timing belt, pulleys and water pump on the Renault engine. The aim of this bachelor thesis is to fabricate tool set, which will be simpler than the&...

Syrovátka, Šimon
Ovlivnění smáčivosti povrchu laserovými technologiemi

This bachelor thesis deals with the use of laser in the field of surface engineering. Its main objective it to produce surface structures that would affect the properties of the original material. It is mainly the wettability of the surface, more particularly the increase in&#...

Skála, Václav
Návrh montážního pracoviště s ohledem na ergonomii

The work is focused on optimizing the existing workplace with regards to ergonomics. It contains a description of the observed workplace and its analysis based on suitably chosen ergonomic methods. On the basis of observations and developed analyzes, corrective measures are proposed to&...

Maršálek, Ondřej
Příklady používání katalogů nástrojů

This thesis deals with the creation of examples for tool catalogues. The examples will be used to teach students to understand the principles and to broaden skills of working with tool catalogues of different companies. The aim of the examples is to find appropriate tools ...

Přibíková, Petra
Návrh kritérií pro hodnocení dodavatelů dle kvality

This thesis provides evaluation of current criteria for rating of suppliers in a production company. There are certain quality based criteria designed to be introduced into existing company documents.

Laudát, Vít
Tvorba technické části katalogu fréz

The bachelor thesis describes the basic ways of milling and indicates their appropriate use.

Collection's Items (Sorted by Submit Date in Descending order): 1 to 20 of 175